Sony FCB-EX480C 18x Exview NTSC Color Block Camera with HAD CCD
The FCB-480C color block camera combines a 1/4 type EXview HAD® CCD with a minimum illumination of 0.7 lux (typical 50 IRE) and an auto ICR function. Comes equipped with a 18x lens featuring Sony's new "SMART" Lens Control technology and upgraded 3-D "Spherical Privacy Zone Masking" function.
Features
1/4 type EXview HAD CCD
Minimum Sensitivity of 0.7 lux (50 IRE)
216x total optical zoom (18x optical zoom/ 12x digital)
380,000 pixels (NTSC)
High-speed serial communication (max. 38.4 kbps) and TTL signal-level control (VISCA™ protocol) for quick command processing
Programmable factory preset
Various AE modes including zoom trigger and interval mode
Various AF modes including spot AE mode to optimize the brightness within a specific area
Various customizable settings
Key switch control capability
Low power consumption (minimum 1.6 W)
EEPROM backup system without battery
Lead-free solder mounting board
Specs
Image Sensor : 1/4 type EXview HAD CCD
Number of Effective Pixels : Approx. 380,000
Lens : 18x zoom, f=4.1mm (wide) to 73.8 mm (tele), F1.4 to F3.0
Digital Zoom : 12x (216x with optical zoom)
Angle of View (H) : 48 degree (wide end) to 2.8 degree (tele end)
Min. Working Distance : 35mm (wide end) to 800mm (tele end)
Sync. System : Internal/External (V-Lock)
Min. Illumination : 0.7 lx (typical) (50 IRE)
S/N Ratio : More than 50 dB
Electronic Shutter : 1/1 to 1/10,000 sec., 22 steps
White Balance : Auto, ATW, Indoor, Outdoor, One-Push, Manual
Gain : Auto/Manual (-3 to 28 dB, 2dB steps)
AE Control : Auto, Manual, Priority mode, Bright, EV compensation, Back light compensation
EV Compensation : -10.5 to 10.5 dB (1.5 dB steps)
Back Light Compensation : On/Off
Privacy Zone Masking : On/Off (24 positions)
Flicker Cancel : Auto
Focusing System : Auto (Sensitivity : Normal, Low), One-Push AF, Manual, Infinity, Interval AF, Zoom Trigger AF
Picture Effect : E-Flip, Nega. Art, Black & White, Mirror Image
Camera Operation Switch : Zoom tele, Zoom wide
Video Output : VBS: 1.0Vp-p (sync negatibve), Y/B Output
Camera Control Interface : VISCA™ (TTL signal level), baud rate: 9.6Kb/s, 19.2Kb/s, 38.4Kb/s, Stop Bit: 1/2 selectable
Power Consumption : 6V to 12V DC, 1.6W (motors inactive) / 2.5W (motors active)
Storage Temperature : -20 to 60 Degree C (-4 to 140 degree F)
Operating Temperature : 0 to 50 Degree C (32 to 122 degree F)
Width : 2 1/8 inch 52.0 mm
Height : 2 3/8 inch 57.5 mm
Depth : 3 1/2 inch 88.5 mm
Weight : 8.1 oz approx. 230g
For more information, please contact Ron Wells at 888-VMI-CAMS ext. 310, or email visales@vmivideo.com with your request (please include the article name, and your contact information).
|
1-888-VMI-CAMS | email: VIsales@vmivideo.com